Leo Chemo Plast Pvt. Ltd.
Leo Chemo Plast Pvt. Ltd.
Ghatkopar West, Mumbai, Maharashtra
Send SMS
Send E-mail

Organic Compounds

Offering you a complete choice of products which include pyridine, tetra hydro furan, allyl chloride, isocyanate mdi, toluene di isocyanate and butyraldehyde.
Request CallBack
Pyridine
Ask For Price

Pyridine

Physical and Chemical Properties:

Physical state and Appearance:Yellow liquid
Odor:obnoxious odor
Molecular Weight:79.1 g mol−1
pH (1% soln/water):8.5
Boiling Point:116 °C
Melting Point:-43.6 °C
Specific Gravity:0.983 @ 77 °F
Vapor Pressure:10 mm Hg
Vapor Density:2.72
Water, % by wt:0.007


Applications:


Role in chemical synthesis :Pyridine is an important solvent and reagent in organic synthesis. It is used as a solvent in Knoevenagel condensations. It is the precursor to myriad insecticides, herbicides, pharmaceuticals, food flavorings, dyes, rubber chemicals, adhesives, paints, explosives and disinfectants. Examples include paraquat
Pyridine as a solvent : Pyridine is a widely used polar but aprotic solvent. It is miscible with a broad range of solvents including hexane and water. Deuterated pyridine, called pyridine-d5, is a common solvent for1H NMR spectroscopy.
As a denaturant : Pyridine is also used as a denaturant for antifreeze mixtures, for ethyl alcohol, for fungicides, and as a dyeing aid for textiles.
Role in analytical chemistry Pyridine, along.


Productions:


Pyridine is produced either by isolation from natural sources such as coal, or through chemical synthesis. Pyridine is produced by the fractional distillation of coal-tar residues in which 1 ton of coal produces 0.07-0.21 pounds of pyridine bases of which 57% is pyridine. Synthetically produced pyridine is currently the more important source of pyridine for commercial uses. Small amounts of pyridine are synthesized from acetaldehyde, formaldehyde, and ammonia with a fluidized silica-alumina catalyst, followed by fractionation to isolate the pyridine. Pyridine is produced from natural sources by Crowley Tar Products.


Attention:


Contact with eyes may cause severe irritation, and possible eye burns. May cause skin irritation. May be harmful if absorbed through the skin. Effects may be delayed. May cause smarting of the skin and first-degree burns on short exposure. Substance is readily absorbed through the skin. Pyridine was determined not to be a skin sensitizer in guinea pigs. May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

Yes! I am interested
Request CallBack
Pyridine
Ask For Price

Pyridine

We are engaged in offering Pyridine. The physical state and appearance of the substance is yellow liquid. It has the molecular weight of 79.01 g/mole. It is used as preservative for both animal feed and food for human consumption. We get the substance from the certified vendors’ available in the domain. Clients can get the substance from us at cost effective prices.


Features:

  • Non – toxic
  • High solubility
  • Easy to use


Physical and Chemical Properties:

Physical state and Appearance:Yellow liquid
Odor:obnoxious odor
Molecular Weight:79.1 g mol−1
pH (1% soln/water):8.5
Boiling Point:116 °C
Melting Point:-43.6 °C
Specific Gravity:0.983 @ 77 °F
Vapor Pressure:10 mm Hg
Vapor Density:2.72
Water, % by wt:0.007


Yes! I am interested
Request CallBack
Tetra Hydro Furan
Ask For Price

Tetra Hydro Furan

We are engaged in offering Tetra Hydro Furan. The offered furan is used primarily as a starting material in the production of acrylic esters; as a monomer for polyacrylic acid and salts, as a comonomer with acrylamide for polymers used as flocculants, with ethylene for ion exchange resin polymers, with methyl ester for polymers. Further, it is a liquid substance which is sensitive to heat and ignition.

Features:

  • Store in dry cool place
  • Long shelf life
  • Easily oxidizes


Physical and Chemical Properties:


Physical state and Appearance :Liquid.
Odor :Ethereal. Fruity.
Color :Colorless.
Boiling Point :65°C (149°F) @ 760 mm Hg
Flash point :CLOSED CUP: -14.5°C (5.9°F). OPEN CUP: -20°C (-4°F).
Melting Point :-108.3°C (-162.9°F)
Specific Gravity :0.8892 (Water = 1)
Vapor Pressure :19.3 kPa (@ 20°C)
Vapor Density :2.5 (Air = 1)
Volatility :100% (v/v).
Solubility :Easily soluble in diethyl ether, acetone. Partially soluble in cold water. Solubility in water is 30%. Miscible with alcohols, ketones, esters, hydrocarbons, and ethers. Very soluble in benzene, ethanol, and chloroform.
Water, ppm :200 or less
Purity, % :99.95 or more
Specific gravity (20/4°c) :0.886~0.889
Refractive index (n20/d) :1.406~10408
Peroxide, ppm :200 or less

Yes! I am interested
Request CallBack
Allyl Chloride
Ask For Price

Allyl Chloride

We offer Allyl Chloride for our prestigious clients. It is produced by using the best grades of raw materials in modern facilities. Our vendors use latest technologies to formulate the same and maintain rigid quality standards in accordance with set industry norms. It is used extensively in pharmaceutical industry, rubber industry, and in production of water treatment chemicals. It is also used widely as a chemical intermediate and as reactant in formulation of certain compounds.


Features:


  • Impeccable formulation process
  • High purity


Physical and chemical properties:

Physical state and appearance

Liquid

Odor

Pungent. Irritant. Sharp

Color

Clear Colorless

Boiling Point

45°C (113°F)

Critical Temperature

241.11°C (466°F)

Flash point

CLOSED CUP: -31.7°C (-25.1°F). OPEN CUP: -28.9°C (-20°F)

Melting Point

-135.5°C (-211.9°F)

Specific Gravity

0.94 (Water = 1)

Vapor Pressure

39.3 kPa (@ 20°C)

Vapor Density

2.6 (Air = 1)

Odor Threshold

0.47 ppm

Water/Oil Dist. Coeff:

The product is more soluble in water; log(oil/water) = -0.2

Solubility

Very slightly soluble in cold water

Purity Wt%

Min 98.5

Moisture Wt%

Max 0.02



Yes! I am interested
View PDF
Request CallBack
Isocyanate MDI
Ask For Price

Isocyanate MDI

Physical and Chemical Properties:

Physical state and appearancewhite to light yellow flakes or crystals
OdorFaint odor
Flash Point218 C
Boiling Point194 C at 5 mm Hg
Melting Point37.2 C
Specific Gravity1.23 (25°C)
SolubilityInsoluble
NCO content, %31
Viscosity, mP.a.s.210 (25°C)


Application:


MDI is commonly used to manufacture the following types of polyurethane foams:

  • Rigid and semi-rigid
  • Flexible
  • Integral skin
  • Microcellular


MDI is also used to make:

  • Elastomers
  • Coatings
  • Adhesives
  • Binders


MDI products are used to produce polyurethanes for the following applications:


  • Autothane prepolymers – microcellular elastomers for impact, shock, and vibration management in vehicle suspensions and chassis.
  • Delta-therm isocyanates – mining, civil engineering, and pipeline construction.
  • Diprane isocyanates and prepolymers – durable and solvent-resistant elastomers
  • Duothane prepolymers – sealants, caulking, adhesives, gaskets, wear pads, structural parts.
  • Duramould isocyanates – cast concrete, rapid prototyping, and tooling industries.
  • Durelast isocyanates – furniture edgings.
  • Dynathane isocyanates and prepolymers – elastomers that reduce vibration and noise.
  • Enforcer And Enhancer™ isocyanates – carpet backing.
  • Hyperkote isocyanates – protective coatings designed for industrial and automotive use.
  • Hyperlast isocyanates – general elastomers for material handling and industrial engineering.
  • Hypol prepolymers – hydrophilic polyurethane foams, elastomers, coatings, adhesives, or gels.
  • Rotakote prepolymers – elastomers for rotational coatings.
  • Specfil isocyanates – widely used by the automotive industry for filter gasketing (oil, fuel and ir), for the production of industrial filters, for in-situ gasketing applications, climate control systems, ventilation systems, and as dust filters in respiration masks.
  • Specflex isocyanates – flexible and integral skin foams used in the furniture and transportation industries for steering wheels, automotive seating, headrests, and dashboards.
  • Spectrim isocyanates – reaction moldable products for the transportation industry such as bumpers, rocker panels, spoilers, and grills.
  • Traffideck isocyanates and prepolymers – waterproofing and surfacing systems for parking decks, roofs and balconies, bridges, and marine use.
  • Voracor isocyanate –rigid foam insulation for the construction industry, commercial refrigerators, water heaters, pipeline insulation, roofing, manufactured housing and modular construction.

Yes! I am interested
Request CallBack
Toluene Di Isocyanate
Ask For Price

Toluene Di Isocyanate

Physical and Chemical Properties:

Physical state and Appearance
Liquid
Color
Colorless to light yellow
Boiling Point
251°C (483.8°F)
Melting Point
19.4°C (66.9°F)
Specific Gravity
1.2244 (Water = 1)
Vapor Pressure
0.01 mm of Hg (@ 20°C)
Vapor Density :6 (Air = 1)
Odor Threshold
0.449 ppm
Solubility
Soluble in cold water.
Purity, %
99.5 min
Hydrolyzable Chloride, Wt ppm
80 max
Acidity (as HCL), Wt ppm :20 max
Total Chlorine, Wt ppm
100 max
2.4 TDI Isomer, Wt % :79 - 81


Yes! I am interested
View PDF
Request CallBack
Butyraldehyde
Ask For Price

Butyraldehyde

We are engaged in offering Organic Chemicals such as Butyraldehyde. It is used frequently in production of rubber accelerators, synthetic resins, pesticides, crop protection compounds, pharmaceuticals, and perfumes. It is a very important intermediate used in chemical industry. It is formulated by hydroformylation of propylene. It is produced in state of the art manufacturing facility by using high end technologies. We offer the same at affordable prices to our valued customers.



Features:


  • Reliable performance
  • Excellent purity


Physical and Chemical Properties:
Physical state and appearanceLiquid.
OdorAldehyde like. (Strong.)
Molecular Weight72.11 g/mole
ColorColorless
Boiling Point74.8°C (166.6°F)
Critical Temperature251°C (483.8°F)
Flash point-7° C
Melting Point-96.4 (-141.5°F)
Vapor Pressure12.3 kPa (@ 20°C)
Vapor Density2.5 (Air = 1)
Volatility99% (v/v).
Dispersion PropertiesSee solubility in water, methanol, diethyl ether, n-octanol, acetone.
SolubilitySoluble in methanol, diethyl ether, n-octanol, acetone. Insoluble in cold water.
Acidity as butyric acid, % (m/m)0.3
Water, % (m/m)0.006
n-Butyraldehyde, % (m/m)99.0
Isobutraldehyde, % (m/m)0.3
Specific gravity @20/20 °c0.807

Yes! I am interested
Request CallBack
N Butyraldehyde
Ask For Price

N Butyraldehyde

N Butyraldehyde is also known as butanal which is an organic compound and comes with formula CH(CH)CHO. As an aldehyde derivative of butane, it is colorless flammable liquid with acrid smell and is miscible with most organic solvents. It has boiling point of 74.8 °C, molar mass of 72.11 g/mol and is available in physical state as a clear liquid. Some of its properties include:

 

Features:

 

  • Melting point of -99 C and specific gravity of 0.803
  • Refractive index of 1.3790
  • Readily oxidizes on prolonged exposure to air to form explosive peroxides
  • Used as intermediate in manufacturing solvents and polymers, plasticizers, alcohols, n-butanol, trimethylolpropane, n-butyric acid
  • Also used as intermediate to make rubber accelerators, textile auxiliaries, pharmaceuticals, agrochemicals, antioxidants, flavours

Yes! I am interested
Request CallBack
Pyrrolidine Compound
Ask For Price

Pyrrolidine Compound

We are engaged in offering Pyrrolidine compound. It is used in synthetic esters, metal, and performance chemicals. 2-Ethylhexanoic acid is the organic compound widely used to prepare metal derivatives that are soluble in non polar organic solvents. It is processed at our certified vendor’s end. Apart from this, clients can get the substance from us at industry leading prices.

Features:

  • Containing copper and iron content
  • Less pH level
  • Easy to mix

Yes! I am interested
Request CallBack
Isocyanate MDI
Ask For Price

Isocyanate MDI

Physical and Chemical Properties:
Physical state and appearancewhite to light yellow flakes or crystals
OdorFaint odor
Flash Point218 C
Boiling Point194 C at 5 mm Hg
Melting Point37.2 C
Specific Gravity1.23 (25°C)
SolubilityInsoluble
NCO content, %31.0
Viscosity, mP.a.s.210 (25°C)

Yes! I am interested
Request CallBack
Para Tertiary Octyl Phenol
Ask For Price

Para Tertiary Octyl Phenol

Physical and Chemical Properties:
Physical state and appearanceWhite to pale yellow briquettes or molten liquid
Melting Point77 ° C 170 F 170 F
Flash Point132°C (270°F)
Boiling Point290°C (554°F)
Specific Gravity0.940
Vapor Pressure5 mmHg @ 136 C
Vapor Density> Air
SolubilityNot very soluble [<1%]
Polyethylene Glycol Octyl phenol Ether> 97%
Polyethylene Glycol< 3%
Dioxane< 0.0055%
Ethylene Oxide< 0.001%

Yes! I am interested
View PDF
Request CallBack
N Butyl Methacrylate
Ask For Price

N Butyl Methacrylate

We have ready stock of N Butyl Methacrylate - mitsubishi gas chemical company inc, japan


Features:

  • It is used in formulating paints and dispersions for paints, inks, and adhesives. It is used in making cleaning products, antioxidant agents, amphoteric surfactants.
  • It is used in making aqueous resins and dispersions for textiles and papers. acrylate also used in making vitamin B1.

Yes! I am interested
Request CallBack
Adipic Acid
Ask For Price

Adipic Acid

Adipic Acid (also called hexanedioic acid) is a white, crystalline compound of C6 straight-chain dicarboxylic acid; slightly soluble in water and soluble in alcohol and acetone. Almost all of the commercial adipic acid is produced from cyclohexane through two sequent oxidation processes. The first oxidation is the reacting of cyclohexane with oxygen in the presents of cobalt or manganese catalysts at a temperature of 150 - 160 C, which produce cyclohexanol and cyclohexanone. Then, the intermediates are further reacted with nitric acid and air with a catalyst (copper or vanadium) or without nitric acid.



Features:


  • Cyclohexane can be prepared by the hydrogenation of benzene.
  • There are other ways such as the reactions using phenol, butadiene, and various fats as the starting material.
  • Adipic acid consumption is linked almost 90% to nylon production by the polycondensation with hexamethylenediamine. Nylon, having a protein-like structure, is further processed into fibers for applications in carpeting, automobile tire cord and clothing.
  • Adipic acid is used in manufacturing plasticizers and lubricants components.
  • It is used in making polyester polyols for polyurethane systems.
  • Food grade adipic acid is used as gelling aid, acidulant, leavening and buffering agent.
  • Adipic acid has two carboxylic acid, -COOH, groups, which can yield two kinds of salts.
  • Its derivatives, acyl halides, anhydrides, esters, amides and nitriles, are used in making target products such as flavoring agents, internal plasticizers, pesticides, dyes, textile treatment agents, fungicides, and pharmaceuticals through further reactions of substitution, catalytic reduction, metal hydride reduction, diborane reduction, keto formation with organometallic reagents, electrophile bonding at oxygen, and condensation.

Yes! I am interested
Request CallBack
Paraformaldehyde 92%
Ask For Price

Paraformaldehyde 92%

Paraformaldehyde is a white crystalline solid formed by polymerization of methanal gas (formaldehyde, HCHO) by heating.


Features:


  • Lower molecule paraformaldehyde is soluble alkali but insoluble in alcohol, ether, and water.
  • It is used as fumigant, disinfectant, and fungicide.
  • Higher molecule homopolymer is a hard engineering plastic which is strong, rigid, and have good moisture, heat, and solvent resistance.
  • Commercially acetal copolymers are also widely used for industrial and automotive applications with excellent balance of properties and processing characteristics.
  • Paraformaldehyde is used to make various resins with mainly phenol (melamine resin; phenol resin; vinylon; polyacetal resin; terephthalic acid; diphenyl methane diisocyanate, acrylic acid esters)

Yes! I am interested
Request CallBack
Methane Sulphonyl Chloride
Ask For Price

Methane Sulphonyl Chloride

We are engaged in offering Methane Sulphonyl Chloride.

Physical and Chemical Properties:


Physical state and appearanceColorless transparent oil liquid
Molecular Weight114.55 g/mole
Flash pointCLOSED CUP: 110°C (230°F).
Melting Point-32°C
Specific Gravity1.4805 (Water = 1)
Vapor Density3 (Air = 1)
Purity99.5% min
Water Content≤200ppm
Viscosity(25°C)1.97cp
Heavy Metal≤10ppm
Fe3+≤10ppm
Density(18/4°C)1.48



Applications:

  • METHANE SULPHONYL CHLORIDE used in organic synthesis, dyestuffs, pharmacy and pesticides etc.
  • It can be used as catalyst, curing agent and stabilizer in organic synthesis; in dyestuff industry.
  • It is used as the raw material for disperse red 343; in pharmacy.
  • It is used to produce olsalazine sodium etc.


Production:


  • By thiourea by methylation, chlorine oxide obtained;
  • By methane sulfonic acid and thionyl chloride reaction;
  • A mercaptan to as the raw material, wet chlorination in the system.
  • It is manufactured either via direct synthesis from methane and sulfuryl chloride in a radical reaction.

 

    Technical Details:


    • CH4 (g) + SO2Cl2 (g) → CH3SO2Cl + HCl (g) (1)
    • The methanesulfonic acid prepared is reacted with thionyl chloride (4) or phosgene (5) to form mesyl chloride.
    • CH3SO3H + SOCl2 → CH3SO2Cl + SO2 + HCl (4)
    • CH3SO3H + COCl2 → CH3SO2Cl + CO2 + HCl (5)


    Attention:

      • Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
      • In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Wash clothing before reuse. Thoroughly clean shoes before reuse.
      • If inhaled, remove to fresh air. If not breathing, give artificial respiration.
      • If breathing is difficult, give oxygen. If swallowed, do not induce vomiting unless directed to do so by medical personnel.
      • Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.

      Yes! I am interested
      Request CallBack
      Propylene Glycol
      Ask For Price

      Propylene Glycol

      Propylene Glycol is an odorless and colorless liquid; boiling point 188 C, freezing point -39 C. Propylene glycol is prepared by hydrolysis of propylene oxide. Large amount of propylene glycol is used in the plastics industry for the manufacture of polyester fibers and alkyd resins.


      Features:


      • It is used as a main ingredient in automobile antifreeze and engine-cooling liquids and in brake and hydraulic fluids due to its useful properties of low freezing point, involatility and low corrosive activity.
      • It is used in the preparation of body-care surfactants. Propylene glycol is replacing ethylene glycol and ethanol as it is less toxic than ethylene glycol.
      • Propylene glycol is described as a "generally recognized as safe for use in food, cosmetics, and medicines" by FDA. Propylene glycol USP grade is used as a non-toxic antifreeze in breweries and dairies.
      • It is used as a humectant in foods and cosmetics.
      • It is used as a solvent for colouring or flavouring agents as well as in many oral, injectable or topical pharmaceuticals.
      • Its antibacterial property is applied in the preparation of sanitizing lotions.


      Yes! I am interested
      Request CallBack
      Tri Ethylene Tetramine
      Ask For Price

      Tri Ethylene Tetramine

      Tri Ethylene Tetramine is a clear to yellowish oily liquid; melting point 12 C, boiling point 280 C.



      Features:


      • It is miscible with water and the solution is alkaline ( (pH 10 at 10% solution).
      • It reacts with ketones, halogenated hydrocarbons, nitriles, epoxides, and with strong oxidants.
      • Commercial triethylenetetramine is a mixture of linear TETA (typically 60%) and branched or cyclic TETA such as N,N'-Bis(2-aminoethyl), N-[1-(2-piperazin-1-yl-ethyl)]ethane -1,2-diamine, tris-(2-aminoethyl)-amine.
      • TETA and its derivatives are used as an epoxy curing agent.
      • Their applications are similar to those of ethylenediamine and diethylenetriamine.

      Yes! I am interested
      Request CallBack
      Thiourea
      Ask For Price

      Thiourea

      We are engaged in offering Thiourea.

      Yes! I am interested
      Request CallBack
      Dimethyl Carbonate
      Ask For Price

      Dimethyl Carbonate

      Physical and Chemical Properties:

      Physical state and appearanceClear liquid
      OdorPleasant
      Molecular Weight90.08 g/mole
      ColorColorless. Clear
      Boiling Point90°C (194°F) - 91 C
      Critical Temperature274.85°C (526.7°F)
      Flash point18°C (64.4°F). OPEN CUP: 21.667°C (71°F).
      Melting Point2°C (35.6°F) - 4 C.
      Specific Gravity1.069 @ 20 C.(Water = 1) 1.0636 @ 25 C
      Vapor Pressure5.6 kPa (@ 20°C)
      Vapor Density3.1 (Air = 1)
      SolubilityInsoluble in cold water, hot water
      Purity99.0% min
      Water0.1% max
      Free Acid0.2% max


      Yes! I am interested
      Request CallBack
      Cyclohexylamine
      Ask For Price

      Cyclohexylamine

      Physical and Chemical Properties:

      Physical state and appearanceLiquid
      OdorFish. Amine like
      Molecular Weight99.17 g/mole
      PH (1% soln/water)11 [Basic.]
      ColorColorless to light yellow
      Boiling Point134.5°C (274.1°F)
      Flash point28°C
      Melting Point-17.7°C (0.1°F)
      Specific Gravity0.8647 (Water = 1)
      Vapor Pressure10.7 mm of Hg (@ 20°C)
      Vapor Density3.42 (Air = 1)
      Odor Threshold26 ppm
      Water/Oil Dist. CoeffThe product is more soluble in oil; log(oil/water) = 1.5
      SolubilityEasily soluble in cold water
      Cyclohexylamine [%]99.7
      Hydrocarbons [C6]0.05
      Cyclohexanol0.05
      Water0.1
      Aniline0.005


      Yes! I am interested
      Request CallBack
      Cyclohexanone
      Ask For Price

      Cyclohexanone

      Physical and Chemical Properties:

      Physical state and appearanceLiquid. (Oily liquid.)
      OdorOdor reminiscent of of peppermint and acetone
      Molecular Weight98.15g/mole
      ColorColorless
      Boiling Point155.6°C (312.1°F) @ 760 mm Hg
      Critical Temperature356°C (672.8°F)
      Flash point44 °C
      Melting Point-31°C (-23.8°F)
      Specific Gravity0.9478 (Water = 1)
      Vapor Pressure0.7 kPa (@ 26.7°C)
      Vapor Density3.4 (Air = 1)
      Odor Threshold0.88 ppm
      Water/Oil Dist. CoeffThe product is more soluble in oil; log(oil/water) = 0.8
      Dispersion PropertiesSee solubility in water, diethyl ether, acetone
      SolubilitySoluble in diethyl ether, acetone. Partially soluble in cold water, hot water.
      Cyclohexanone content, wt%99.8 min
      Boiling range C153-156 C
      Water Content, Wt%0.1 max
      Cyclohexanone wt%0.1 max
      Phenol Content, ppm10 max


      Yes! I am interested
      Request CallBack
      Tri N Butylamine
      Ask For Price

      Tri N Butylamine

      We are engaged in offering Tri N Butylamine.


      Specification:


      Product Identification:
      CAS NO.102-82-9
      EINECS NO.203-058-7
      FORMULA[CH3(CH2)3]3N
      MOL WT.185.36
      H.S. CODE29211.99
      ToxicityOral rat LD50: 114 mg/kg
      SynonymsTris[N-butylamine]; TNBA; N,N-Dibutyl-1-butanamine;
      Tri-n-butylamine; Tributilamina; Tris-n-butylamine;
      Classification:
      Physical And Chemical Properties:
      Physical StateClear to light yellow liquid
      Melting Point
      -70 C
      Boiling Point
      214 - 216 C
      Specific Gravity0.778
      Solubility In WaterSlightly soluble
      pH11.5
      Vapor Density6.4
      Autoignition245 C
      NFPA RatingsHealth: 3 Flammability: 2 Reactivity: 0
      Refractive Index1.4283
      Flash Point86 C
      StabilityStable under ordinary conditions
      Applications:
      Tributylamine is used as a solvent. It is used as an intermediate in the manufacture of pharmaceuticals, quaternary ammonium compounds, agrochemicals, surfactants, lubricant additives, vulcanization accelerators and dyes.
      Sales Specification:
      AppearanceClear to light yellow liquid
      Purity (GC)99.0 min
      Color (AHHA)20 max
      Moisture0.3 max
      Transportation
      Packing150kgs in Drum
      Hazard Class8 (Packing group; II)
      UN NO.2542

      Yes! I am interested
      Request CallBack
      Isobutanol
      Ask For Price

      Isobutanol

      Specification:-

      Product Identification:
      Cas NO.78-83-1
      Einecs No.201-148-0
      FormulaCH3(CH2)3OH
      ToxicityOral rat LD50: 2460 mg/kg
      Synonyms1-Hydroxymethylpropane; Isopropylcarbinol;
      Classification
      Isobutanol is useful in organic synthesis, as a solvent in coating applications. It may be used as a supplement for n-butyl alcohol in many applications.
      Physical And Chemical Properties:
      Physical Stateclear liquid
      Melting Point-108 C
      Boiling Point107 - 108 C
      Solubility In Water9.5 ml/100ml
      Vapor Density2.6
      Autoignition413 C
      NFPA RatingHealth: 1; Flammability: 3; Reactivity: 0
      Flash Point26 - 29 C
      StabilityStable under ordinary conditions
      Applications:
      Butyl acrylate and methacrylate, direct solvent use, plasticizers, including butylamines
      Sales Specification:
      Purity99.5% min
      Color10 max, APHA
      Water0.05% max
      Specific Gravity0.802 - 0.804
      Acidity0.002 max ( KOH mg/kg)
      Precaution In Handling:
      Protect against physical damage. Store in a cool, dry location. Storage areas should be No Smoking areas. Use non-sparking type tools, including explosion proof ventilation.
      TRANSPORTATION
      PACKING160kgs in drum, in bulk
      HAZARD CLASS3 (Packing Group: III)
      OTHER INFORMATION
      Hazard Symbols: XN F, Risk Phrases: 10-20, Safety Phrases: 7/9-9-13-16-26-33-37/39-46

      Yes! I am interested
      Request CallBack
      Maleic Anhydride
      Ask For Price

      Maleic Anhydride

      We are engaged in offering Maleic Anhydride. This is prepared underneath the supervision of capable personnel using top notch grade inputs in line with the set principles. To add, we are delivering these in top-class packing solutions to our customers.



      Features:


      • Pure
      • Reliable
      • Longer shelf life

      Yes! I am interested
      Request CallBack
      N - Hexane 99% - High Purity
      Ask For Price

      N - Hexane 99% - High Purity

      We are engaged in offering N - Hexane 99% - High Purity.

      Yes! I am interested
      Request CallBack
      N-Heptane 99% High Purity
      Ask For Price

      N-Heptane 99% High Purity

      We are engaged in offering N-Heptane 99% High Purity.

      Yes! I am interested
      Request CallBack
      Acrylonitrile
      Ask For Price

      Acrylonitrile

      We are engaged in offering  Acrylonitrile to our esteemed clients. It is formulated by using sophisticated process from the highest grades of raw materials. It is an important monomer that is used for producing a wide range of homo-polymers, as well as co-polymers such as SAN, ABS, ASA and synthetic rubbers including NBR. It is offered at reasonable rates to our clients.

      Features:

      • Dependable purity
      • Longer shelf life


      Physical and chemical properties:

      Physical state and appearance

      Liquid.

      Odor

      Mild Peach kernels. (Slight.)

      Molecular Weight

      53.06 g/mole

      Color

      Clear Colorless

      Boiling Point

      77.3°C (171.1°F)

      Critical Temperature

      262.78°C (505°F)

      Flash point

      84 °C

      Melting Point

      -82°C (-115.6°F)

      Specific Gravity

      0.806(Water = 1)

      Vapor Pressure

      11.1 kPa (@ 20°C)

      Vapor Density

      1.8 (Air = 1)

      Water/Oil Dist. Coeff:

      The product is more soluble in oil; log(oil/water) = 0.3

      Dispersion Properties

      See solubility in water, diethyl ether, acetone

      Solubility

      Soluble in diethyl ether, acetone. Very slightly soluble in cold water, hot water. Soluble in all common organic substances and Isopropyl alcohol. Soluble in benzene and alcohol

      Acetone, ppm/wt

      ≤200

      Acetonitrile, ppm/wt

      ≤300

      Propionitrile, ppm/wt

      ≤200

      Acrolein, ppm/wt

      ≤20

      Acidity as acetic acid, ppm/wt

      ≤35

      Aaldehydes as acetaldehyde, ppm/wt

      ≤50

      Copper, ppm/wt

      ≤0.2

      HCN, ppm/wt

      ≤10

      Inhibitor, ppm/wt(no nitrites)

      35-45

      Iron, ppm /wt

      ≤0.2

      Peroxides, ppm/wt, (no nitrites).

      ≤0.5





      Yes! I am interested
      Request CallBack
      Ethyl Acrylate
      Ask For Price

      Ethyl Acrylate

      Physical and Chemical Properties:
      Physical state and appearanceLiquid
      OdorPenetrating Lachrymator (Strong.)
      Molecular Weight100.12 g/mole
      ColorColorless to light yellow
      Boiling Point99.4°C (210.9°F)
      Flash point-2°C
      Melting Point-72°C (-97.6°F)
      Specific Gravity0.923 (Water = 1)
      Vapor Pressure29.3 mm of Hg (@ 20°C)
      Vapor Density3.45 (Air = 1)
      Dispersion PropertiesSee solubility in water
      SolubilityPartially soluble in cold water
      Purity99.5
      Color10 APHA
      Water0.05 wt %
      Sp.gr (20/4 °c)0.896 ~ 0.901
      Acidity50 wt %
      Inhibitor (MEHQ)60 +/- 10 ppm

      Yes! I am interested
      Request CallBack
      Methylene Chloride
      Ask For Price

      Methylene Chloride

      We offer Methylene Chloride that is extensively used in producing paint and varnish stripper formulations. It also takes part in process of extraction food and pharmaceuticals industries. It is also widely used as solvent in aerosol preparations. It is also used as process solvent in the production of polycarbonates. We ensure stringent quality norms and offer the same at industry leading prices to our valued clients.


      Features:


      • Unmatched purity
      • Accurate composition
      • Colorless


      Physical and chemical properties:

      Physical state and Appearance

      Liquid.

      Molecular Weight

      84.93 g/mole

      Boiling Point

      39.75°C (103.5°F)

      Melting Point

      -96.7°C (-142.1°F)

      Specific Gravity

      1.3266 (Water = 1)

      Vapor Pressure

      46.5 kPa (@ 20°C)

      Vapor Density

      2.93 (Air = 1)

      Odor Threshold

      214 ppm

      Water/Oil Dist. Coeff

      The product is equally soluble in oil and water; log(oil/water) = 0.1

      Dispersion Properties

      See solubility in water, methanol, diethyl ether, n-octanol, and acetone.

      Solubility

      Easily soluble in methanol, diethyl ether, n-octanol, acetone. Partially soluble in cold water

      Purity, %

      99.95

      HCL, mg/kg

      ≤ 2

      HO, mg/kg

      ≤ 50

      Coloration

      ≤ 10

      CHCL, mg/kg

      ≤ 10

      CHCL, mg/kg

      ≤ 40

      CCL, mg/kg

      ≤ 20

      Non-volatile residue, mg/kg

      ≤ 10

      Chlorine Test

      negative

      AMYLENE, mg/kg

      ≤ 30



      Yes! I am interested
      View PDF
      Request CallBack
      Tertiary Butanol
      Ask For Price

      Tertiary Butanol

      Physical and Chemical Properties:

      Physical state and Appearance
      Liquid. (Colorless liquid (above 78 F) which forms white rhombic crystals.)
      Odor
      Camphor.
      Color
      Colorless.
      Boiling Point
      82.41°C (180.3°F)
      Melting Point
      25.7°C (78.3°F)
      Specific Gravity
      0.78581 (Water = 1)
      Vapor Pressure
      4.1 kPa (@ 20°C)
      Solubility
      Soluble in cold water, hot water. Miscible in esters, aliphatic and aromatic hydrocarbons, alcohol, and ether
      Appearance
      Colorless liquid or crystalline
      Purity % (m/m) ≥
      99.5 min
      Water % (M/M)
      0.05 max
      Free Acid As Achtic Acid WT.PCT %
      0.003 max
      Non-Volatile Matter WT.PCT %
      0.002 max


      Yes! I am interested
      View PDF
      Request CallBack
      Neopentyl Glycol
      Ask For Price

      Neopentyl Glycol

      We offer Neopentyl Glycol that is extensively used as an intermediate for base resins for coatings and also in polyester and polyurethane resin. It finds its uses commonly in textiles, pharmaceuticals, pesticides, plasticizers, as well as petroleum. It is formulated by using cutting edge technologies from the finest grades of basic raw materials in sophisticated manufacturing facilities. It is offered at affordable rates to our valued customers.



      Features:


        • Immaculate formulation process
        • Dependable purity
        • Easy to use


        Physical and chemical properties:

        Physical state and appearance

        White Crystal

        Odor

        Slight.

        Molecular Weight

        104.17 g/mole

        Color

        White

        Boiling Point

        210°C (410°F)

        Flash point

        CLOSED CUP: 103°C (217.4°F).

        Melting Point

        128°C (262.4°F)

        Specific Gravity

        1.06 (Water = 1)

        Dispersion Properties

        See solubility in water

        Solubility

        Easily soluble in cold water

        Moisture, %

        0.50 max.

        Resin Test, %

        2 max.

        Acidity Matter, %

        0.40 max.

        Aldehyde, %

        0.50 max.

        Ester, %

        1.00 max.



        Yes! I am interested
        View PDF
        Request CallBack
        Naphthalene Refined
        Ask For Price

        Naphthalene Refined

        We are engaged in offering Naphthalene Refined.

        Physical and Chemical Properties:


        Physical state and Appearance :Solid. (Crystalline solid.)
        Odor :Aromatic
        Molecular Weight:128.19 g/mole
        Color:White
        Boiling Point:218 °C (424.4 °F)
        Flash point:88 °C
        Melting Point:80.2 °C (176.4 °F)
        Specific Gravity:1.162 (Water = 1)
        Vapor Density:4.4 (Air = 1)
        Odor Threshold:0.038 ppm
        Dispersion Properties:Partially dispersed in hot water, methanol, n-octanol. Very slightly dispersed in cold water. See solubility in methanol, noctanol
        Solubility:Partially soluble in methanol, n-octanol. Very slightly soluble in cold water, hot water
        Unsaponifiables:0.097
        Acid value:200.7
        Viscosity at 20 C:208.8 mm 2/s
        Density at 20 C:908 kg/m3

        Yes! I am interested
        Request CallBack
        Acrylamide Powder
        Ask For Price

        Acrylamide Powder

        Physical and Chemical Properties:
        Physical state and appearanceSolid. (Crystalline solid.)
        OdorOdorless.
        Molecular Weight71.08 g/mole
        ColorWhite
        Boiling Point125°C (257°F)
        Flash pointCLOSED CUP: 138°C (280.4°F).
        Melting Point84.5°C (184.1°F)
        Specific Gravity1.122 (Water = 1)
        Vapor Density2.45 (Air = 1)
        Water/Oil Dist. CoeffThe product is more soluble in water; log(oil/water) = -0.7
        Dispersion PropertiesSee solubility in water, methanol, acetone
        SolubilitySoluble in cold water, hot water, methanol. Partially soluble in acetone.
        Purity98.11%
        Moisture0.41%
        Insoluble matter in water0.004%
        Acrylonitrile0 ppm
        Acrylic acid0 ppm
        Conductivity4 US/CM
        ph value7.1
        Copper0 ppm
        p-hydroxyanisole3 ppm
        Iron0.3 ppm

        Yes! I am interested
        View PDF
        Request CallBack
        Phthalic Anhydride
        Ask For Price

        Phthalic Anhydride

        Physical and Chemical Properties:
        Appearancewhite Flakes
        OdorChoking odor
        Boiling Point295 °C
        Flash point152 °C
        Melting Point131 °C
        Specific Gravity1.53@20°C
        Vapor Pressure0.0002 @ 20°C
        Vapor Density6.6
        Solubility0.62 g/100g reacts slowly in water
        Purity> 95%

        Yes! I am interested
        Request CallBack
        Piperazine Anhydrous
        Ask For Price

        Piperazine Anhydrous

        Physical and Chemical Properties:

        Physical state and Appearance:Solid
        Odor:Amine like. Ammoniacal.
        Molecular Weight:86.14 g/mole
        Color:Colorless
        Boiling Point:146°C (294.8°F)
        Flash point:65°C
        Melting Point:106°C (222.8°F)
        Specific Gravity:1.1 (Water = 1)
        Vapor Density:3 (Air = 1)
        Water/Oil Dist. Coeff:The product is more soluble in water; log(oil/water) = -1.2
        Dispersion Properties:See solubility in water.
        Solubility:Easily soluble in cold water. Insoluble in diethyl ether. Freely soluble in glycerol, and glycols.
        Purity, % :99.66


        Yes! I am interested
        Request CallBack
        Itaconic Acid
        Ask For Price

        Itaconic Acid

        We offer Itaconic Acid. The substance physical state and appearance is in the form of white crystal or powder. It is odorless and colorless and having boiling point 268(sublimes) and melting point as -108.3°C (-162.9°F). The main use of tri Chloro ethylene is in the vapor degreasing of metal parts. In addition, it is used as co-monomer to prepare acrylic fibers and rubbers, reinforced glass fiber, artificial diamonds and lens. Moreover, it is additive in fibers and ion exchange resins to increases abrasion, waterproofing, physical resistance, dying affinity and better duration.

        Features:

        • Highly effective
        • Leaves no strain
        • Harmless and eco-friendly

        Physical and Chemical Properties:

        Physical state and Appearance:White crystal Or Powder
        Odor:Odorless
        Molecular Weight:130.1 g/mole
        PH (1% soln/water):1.5-2.0
        Color:white crystals
        Boiling Point °C:268(sublimes)
        Melting Point °C:167-169
        Specific Gravity:1.573 (Water = 1)
        Solubility:Solvents
        Purity %:99.6 min
        Loss on Drying, %:0.3 max
        Residue on ignition, %:0.01 max
        Heavy metal (Pb), ug/g:10 max
        Fe, ug/g:3 max
        Cu, ug/g:1 max
        Mn, ug/g:1 max
        As, ug/g:4 max
        Sulfate, ug/g:30 max
        Chloride, ug/g:10 max
        Melting Point, °C:165-168
        Clarity (5% water solution):Cloudless
        Clarity (20% DMSO):Cloudless

        Yes! I am interested
        View PDF
        Request CallBack
        Acrylic Acid
        Ask For Price

        Acrylic Acid

        We offer Acrylic Acid. It is formulated by using high end technologies by our reputable vendors. It finds its basic application as a starting material for production of acrylic esters and also as a monomer for producing polyacrylic acid as well as salts. It has wide ranging applications in the domain of plastics, paper manufacturing and coating, wall paints, textile sizing and many more. Our esteemed customers can avail it at affordable prices.



        Features:


        • Broad range of applications
        • Impeccable purity


        Physical and chemical properties:

        Physical state and appearance

        Liquid

        Odor

        Acrid (Strong.)

        Molecular Weight

        72.06 g/mole

        Color

        Colorless

        Boiling Point

        141°C (285.8°F)

        Critical Temperature

        342°C (647.6°F)

        Melting Point

        14°C (57.2°F)

        Specific Gravity

        1.05 (Water = 1)

        Vapor Pressure

        0.5 kPa (@ 20°C)

        Vapor Density

        2.5 (Air = 1)

        Odor Threshold

        0.092 ppm

        Water/Oil Dist. Coeff

        The product is more soluble in oil; log(oil/water) = 0.4

        Dispersion Properties

        Partially dispersed in methanol, diethyl ether. See solubility in water

        Solubility

        Soluble in cold water. Very slightly soluble in acetone. Insoluble in diethyl ether.

        Exact purity percentage wt%

        99.5 min

        Water, wt%

        0.3 max

        Acrolein, wt ppm

        2.0 max

        Furfural, wt ppm

        2.0 max

        Ihibitor (MEHQ), wt ppm

        180 ~ 220



        Yes! I am interested
        View PDF
        Request CallBack
        Methacrylic Acid
        Ask For Price

        Methacrylic Acid

        We are engaged in offering Methacrylic Acid. It is widely used in production of surface coatings, textile processing, cosmetics, oil well drilling, paper industry, and so forth. It is also commonly used as soil conditioner in agriculture. We ensure rigid quality norms that are in adherence with well defined industry standards. Our vendors use the finest grades of basic chemicals to formulate this in state of the art facilities by using high end technologies.


        Features:


        • Flawless purity
        • Longer shelf life


        Physical and chemical properties:

        Physical state and appearance

        Liquid. (Above room temperature)

        Odor

        Repulsive. (Strong.)

        Molecular Weight

        86.09 g/mole

        Color

        Colorless

        Boiling Point

        163°C (325.4°F)

        Flash point

        CLOSED CUP: 77°C (170.6°F

        Melting Point

        16°C (60.8°F)

        Specific Gravity

        1.015 (Water = 1)

        Vapor Pressure:

        0.975 mm of Hg (@ 20°C)

        Vapor Density

        2.97 (Air = 1)

        Dispersion Properties

        See solubility in water, diethyl ether, acetone.

        Solubility

        Partially soluble in diethyl ether, acetone. Very slightly soluble in methanol, n-octanol.

        Purity

        98.0% min

        Water

        0.3% max

        Inhibitor

        200 ±10 ppm (monomethyl ether hydroquinone)


        Yes! I am interested
        Request CallBack
        Acrylic Acid
        Ask For Price

        Acrylic Acid

        We are engaged in offering Acrylic Acid. The offered acid is used primarily as a starting material in the production of acrylic esters; as a monomer for polyacrylic acid and salts, as a commoner with acrylamide for polymers used as flocculants, with ethylene for ion exchange resin polymers, with methyl ester for polymers. Further, it is a dry powder which is sensitive to heat and ignition.

        Features:

        • Store in dry cool place
        • Long shelf life
        • Easily oxidizes


        Physical and Chemical Properties:

        Physical state and appearanceLiquid
        OdorAcrid (Strong.)
        Molecular Weight72.06 g/mole
        ColorColorless
        Boiling Point141°C (285.8°F)
        Critical Temperature342°C (647.6°F)
        Melting Point14°C (57.2°F)
        Specific Gravity1.05 (Water = 1)
        Vapor Pressure0.5 kPa (@ 20°C)
        Vapor Density2.5 (Air = 1)
        Odor Threshold0.092 ppm
        Water/Oil Dist. CoeffThe product is more soluble in oil; log(oil/water) = 0.4
        Dispersion PropertiesPartially dispersed in methanol, diethyl ether. See solubility in water
        SolubilitySoluble in cold water. Very slightly soluble in acetone. Insoluble in diethyl ether.
        Exact purity percentage wt%99.5 min
        Water, wt%0.3 max
        Acrolein, wt ppm2.0 max
        Furfural, wt ppm2.0 max
        Ihibitor (MEHQ), wt ppm180 ~ 220



        Applications:


        • Acrylic acid is used primarily as a starting material in the production of acrylic esters; as a monomer for polyacrylic acid and salts, as a comonomer with acrylamide for polymers used as flocculants, with ethylene for ion exchange resin polymers, with methyl ester for polymers.
        • Acrylic acid is used in the field of application of Plastics, Paper manufacture and coating, Exterior house paints for wood and masonry, Coatings for compressed board and related building materials, Flocculation of mineral ore fines and waste water, and treatment of sewage, Printing inks, Interior wall paints, Floor polishes, Floor and wall coverings, Industrial primers, Textile sizing, treatment and finishing, Leather impregnation and finishing, ngs.

        Yes! I am interested
        View PDF
        Request CallBack
        Isophthalic Acid
        Ask For Price

        Isophthalic Acid

        We are engaged in offering Isophthalic Acid. This acid is used in automotive OEM, high molecular weight thermoplastic polymer (pet) modifier, polyester polyols for polyurethane coatings, polyester-melamine baking enamels, and super-weather powder coatings. AT our vendor’s end, this acid is processed by including subjecting an m-phenylene compound to liquid-phase oxidation reaction. Apart from this, clients can get the acid from us at industry leading prices.


        Features:

        • May offer side effects so store it tight air container
        • Easy to dissolve in water
        • Highly sensitive


        Physical and Chemical Properties:

        Physical state and Appearance :white powder
        Molecular Weight :166.14 g/mole
        Melting Point :341 - 343°C
        Auto ignition temperature :647°C
        Moisture %(m/m) :0.05
        3 Carbozybenzaldhyde (mg/Kg) :1
        Ash (mg/Kg) :6
        Cobalt (mg/Kg) :< 1
        Iron (mg/Kg) :< 1
        Manganese (mg/Kg) :< 1
        Metatoluic Acid (mg/Kg) :< 20
        Purity (mg/Kg) :> 99.9



        Application:


        • Automotive OEM
        • High molecular weight thermoplastic polymer (PET) modifier
        • Polyester polyols for polyurethane coatings
        • Polyester-melamine baking enamels
        • Super-weatherable powder coatings
        • Unsaturated polyester resins for high-performance gel coats
        • Waterborne polyester resins with good hydrolytic stability



        Production:


        The invention provides a method for producing isophthalic acid, characterized by including subjecting a m-phenylene compound to liquid-phase oxidation reaction by use of a molecular-oxygen-containing gas in the presence of a catalyst at least containing a heavy metal compound and a bromine compound, and hydrous acetic acid having a water content of 1 to 15 mass %, to thereby yield a slurry; regulating the temperature of the slurry to 35 to 140° C., to thereby cause isophthalic acid to precipitate; removing the isophthalic acid through to solid-liquid separation to thereby recover a mother liqu-or; and recovering the catalyst from the mother liq-uor through a series of reusing at least a portion of the catalyst in the liquid-phase oxidation reaction.

        An adsorption step including regulating the ratio “amount by mole of bromide ions in the mother liq-uor/total amount by mole of heavy metal ions in the mother liq-uor” to 0.3 to 3, and then exposing the mother liq-uor to a pyridine-ring-containing chelate resin which has been heated to 35 to 140° C.

        Yes! I am interested
        X
        Looking for “Organic Compounds”?